Maidaid Halcyon Amika AMH55 WSD Glasswasher

 

Why Buy The Maidaid Halcyon Amika AMH55 WSD Under Counter Glass Washer? 

The Maidaid Halcyon Amika AMH55 WSD warewasher offers the key to ensuring the safety and effectiveness of customised preparations, for residue-free glassware. This unit is easily fitted beneath a countertop and can wash up to 25 glasses, maximum glass height of 325mm or 10 plates at a time. This warewasher has a sleek new design with simple soft wipe clean controls. 

This glass washer unit benefits from a drain pump and internal water softener fitted as standard, which will enhance the protection of your investment, reasons being soft water is much kinder on your appliances than hard. This is due to the mineral build up which exists in hard water. These minerals cause corrosion in the internal workings of your appliances.

This Maidaid Halcyon Amika AMH55 WSD undercounter glasswasher is constructed with a 15 litre wash tank and a 90/150 seconds cycle. With an internal break tank fitted as standard preventing back flow of dish water into the mains water supply which could cause contamination of the mains water, delivering consistent washing results while being easy to use and a long durable lifetime. 

Available in durable Stainless Steel which is both strong, hygienic and easy to clean. The adjustable feet aid the positioning on uneven surfaces without effecting performance. This commercial glasswasher delivers a rinse temperature of 80°C, a temperature that won't be reached by handwashing alone. Cleaning your equipment with this commercial glasswasher guarantees effective sanitation when washing - ensuring staff and customers are protected against transferable viruses

This glasswasher is supplied with 2 x 500 x 500mm baskets, one for glasses and one for plates which adds versatility to this ware washer, helping to provide a constant stream of glasses and crockery. Optional surface scrap trays and power with single phase and three phase. Options selectable below.

Suitable for restaurants, hotels, bars, pubs and cafés, the AMH55 WSD can guarantee you always have pristine glassware and crockery whenever you need it.

*This unit is supplied with one pegged and one open rack and a round cutlery insert*  

Key Features of the Amika AMH55 WSD Glasswasher:

  • New design simple soft wipe clean controls
  • Drain Pump fitted as standard
  • Built in internal water softener
  • Precise control peristaltic detergent and rinse aid dosing fitted as standard
  • Internal break tank fitted as standard.
  • Supplied with 2 open racks, suitable for glasses and plates
  • Rack height 325mm
  • Suitable for hot (Max 50°C) and cold water supply at 2 to 4 bar dynamic supply pressure
  • Wash temperature 60°C
  • Rinse temperature 80°C
  • Optional Surface scrap tray 
  • Optional Electric 2.6 Kw 13A, 230V, UK plug
  • Optional Electric 4.5kW, 20A/ 30A, single phase hardwired
  • Optional Electric 6.5kw three phase hardwired

 Warranty Information:

This unit comes with a 12 Months Parts and Labour full warranty

SKU AMH55 WSD-GLASS
Brand Maidaid Halcyon Warewashing
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 2
Rack Size 500x500
Litres capacity 15 Litres
Usable Height (mm) 340
Height (mm) 830
Width (mm) 580
Depth (mm) 610
Footing Feet
Material Stainless Steel
Interior Finish Stainless Steel
Load Height 340mm
Temperature Range 10C to 50C

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

Downloads
User&Install Instructions
Parts Drawing
20 Parts Drawing
20 Specification Sheet
30 Parts Drawing
30 Specification Sheet
30 User&Install Instructions

Maidaid Halcyon Amika AMH55 WSD Glasswasher

SKU: AMH55 WSD-GLASS

In stock

Delivery: Standard 3 to 5 Working Days
Height (mm): 830
Width (mm): 580
Depth (mm): 610
Warranty Cover: 12 Months Parts & Labour
More Specifications
  • New design simple soft wipe clean controls
  • Drain Pump fitted as standard
  • Built in internal water softener
  • Internal break tank fitted as standard.
loader
Loading...
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows businesses to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £12.55 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our catering equipment leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

PayPal Logo

Multiple payment options with

>

 

Why Buy The Maidaid Halcyon Amika AMH55 WSD Under Counter Glass Washer? 

The Maidaid Halcyon Amika AMH55 WSD warewasher offers the key to ensuring the safety and effectiveness of customised preparations, for residue-free glassware. This unit is easily fitted beneath a countertop and can wash up to 25 glasses, maximum glass height of 325mm or 10 plates at a time. This warewasher has a sleek new design with simple soft wipe clean controls. 

This glass washer unit benefits from a drain pump and internal water softener fitted as standard, which will enhance the protection of your investment, reasons being soft water is much kinder on your appliances than hard. This is due to the mineral build up which exists in hard water. These minerals cause corrosion in the internal workings of your appliances.

This Maidaid Halcyon Amika AMH55 WSD undercounter glasswasher is constructed with a 15 litre wash tank and a 90/150 seconds cycle. With an internal break tank fitted as standard preventing back flow of dish water into the mains water supply which could cause contamination of the mains water, delivering consistent washing results while being easy to use and a long durable lifetime. 

Available in durable Stainless Steel which is both strong, hygienic and easy to clean. The adjustable feet aid the positioning on uneven surfaces without effecting performance. This commercial glasswasher delivers a rinse temperature of 80°C, a temperature that won't be reached by handwashing alone. Cleaning your equipment with this commercial glasswasher guarantees effective sanitation when washing - ensuring staff and customers are protected against transferable viruses

This glasswasher is supplied with 2 x 500 x 500mm baskets, one for glasses and one for plates which adds versatility to this ware washer, helping to provide a constant stream of glasses and crockery. Optional surface scrap trays and power with single phase and three phase. Options selectable below.

Suitable for restaurants, hotels, bars, pubs and cafés, the AMH55 WSD can guarantee you always have pristine glassware and crockery whenever you need it.

*This unit is supplied with one pegged and one open rack and a round cutlery insert*  

Key Features of the Amika AMH55 WSD Glasswasher:

  • New design simple soft wipe clean controls
  • Drain Pump fitted as standard
  • Built in internal water softener
  • Precise control peristaltic detergent and rinse aid dosing fitted as standard
  • Internal break tank fitted as standard.
  • Supplied with 2 open racks, suitable for glasses and plates
  • Rack height 325mm
  • Suitable for hot (Max 50°C) and cold water supply at 2 to 4 bar dynamic supply pressure
  • Wash temperature 60°C
  • Rinse temperature 80°C
  • Optional Surface scrap tray 
  • Optional Electric 2.6 Kw 13A, 230V, UK plug
  • Optional Electric 4.5kW, 20A/ 30A, single phase hardwired
  • Optional Electric 6.5kw three phase hardwired

 Warranty Information:

This unit comes with a 12 Months Parts and Labour full warranty

SKU AMH55 WSD-GLASS
Brand Maidaid Halcyon Warewashing
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 2
Rack Size 500x500
Litres capacity 15 Litres
Usable Height (mm) 340
Height (mm) 830
Width (mm) 580
Depth (mm) 610
Footing Feet
Material Stainless Steel
Interior Finish Stainless Steel
Load Height 340mm
Temperature Range 10C to 50C

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

Downloads
User&Install Instructions
Parts Drawing
20 Parts Drawing
20 Specification Sheet
30 Parts Drawing
30 Specification Sheet
30 User&Install Instructions
SKU Wash Temperature Rinse Temperature Power Supply
AMH55 WSD-GLASS 13 Amps 60C 82C Standard 3 Pin Plug
AMH55 WSD-GLASS 20/ 30 Amps 60C 82C Single Phase Hardwired
AMH55 WSD-GLASS 3 Phase  60C 82C Three Phase Hardwired