Sammic GP-40 Pro Glasswasher

Why buy the Sammic GP-40 Pro glasswasher?

Sammic GP-40 Pro Glasswashers are part of the Sammic PRO range of warewashers which obtain professional results with total guarantee. The glasswasher has a tall clearance height of 240mm to be able to accommodate for a wide range of glasses.

The glasswasher has high performance dispensers for an even distribution of water without leaving dead zone or a build-up of waste or debris. A double filter stops any unwanted debris or waste clogging up the system which is also easily removed. 

Gravity drain as standard with optional drain pump.

Sammic GP-40 important features

  • The unit is constructed from stainless steel to give the unit superior strength with a professional finish. 
  • Rinse aid pump.
  • Peristaltic Detergent Pump
  • 1 glasses basket.
  • 1 mixed basket (plates).
  • 1 small basket for cutlery.
  • Electro-mechanic control panel makes it easy to understand the different cycles.
  • Independent boiler to guarantee the water temperature in each wash.
  • 2 x washing cycle.
  • Double skinned door to prevent noise leaking and trap heat.
  • Boltless spray arms to allow easy detachment for maintenance or cleaning.
  • Features upper and lower wash arms.
Wash Tank Capacity Cycle Duration Baskets per Hr Pump Power Tank Power Boiler Power Total Loading
15L 90/120" 45/30 0.33HP/250W 1200W 2500W 2750W

 

Installation requires water, electric and waste supply within 1m of the machine's position.

Please Note: These units require installation by a qualified warewasher engineer otherwise warranty may be void.

SKU GP-40 GLASS
Weight 41.000000
Brand Sammic
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 1
Usable Height (mm) 240
Height (mm) 670
Width (mm) 470
Depth (mm) 535
Packed Height (mm) 820
Packed Width (mm) 525
Packed Depth (mm) 615
Footing Feet
Material Stainless Steel
Load Height 240mm
Kilowatts 2.75

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

Downloads

Sammic GP-40 Pro Glasswasher

SKU: GP-40 GLASS

In stock

Delivery: Standard 3 to 5 Working Days
Height (mm): 670
Width (mm): 470
Depth (mm): 535
Warranty Cover: 12 Months Parts & Labour
More Specifications
  • Gravity drain unit
  • 2 minute wash cycle duration
  • 400mm wash basket size
  • 20 glass capacity (Ø8cm each)
loader
Loading...
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows businesses to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £5.82 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our catering equipment leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

PayPal Logo

Multiple payment options with

>

Why buy the Sammic GP-40 Pro glasswasher?

Sammic GP-40 Pro Glasswashers are part of the Sammic PRO range of warewashers which obtain professional results with total guarantee. The glasswasher has a tall clearance height of 240mm to be able to accommodate for a wide range of glasses.

The glasswasher has high performance dispensers for an even distribution of water without leaving dead zone or a build-up of waste or debris. A double filter stops any unwanted debris or waste clogging up the system which is also easily removed. 

Gravity drain as standard with optional drain pump.

Sammic GP-40 important features

  • The unit is constructed from stainless steel to give the unit superior strength with a professional finish. 
  • Rinse aid pump.
  • Peristaltic Detergent Pump
  • 1 glasses basket.
  • 1 mixed basket (plates).
  • 1 small basket for cutlery.
  • Electro-mechanic control panel makes it easy to understand the different cycles.
  • Independent boiler to guarantee the water temperature in each wash.
  • 2 x washing cycle.
  • Double skinned door to prevent noise leaking and trap heat.
  • Boltless spray arms to allow easy detachment for maintenance or cleaning.
  • Features upper and lower wash arms.
Wash Tank Capacity Cycle Duration Baskets per Hr Pump Power Tank Power Boiler Power Total Loading
15L 90/120" 45/30 0.33HP/250W 1200W 2500W 2750W

 

Installation requires water, electric and waste supply within 1m of the machine's position.

Please Note: These units require installation by a qualified warewasher engineer otherwise warranty may be void.

SKU GP-40 GLASS
Weight 41.000000
Brand Sammic
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 1
Usable Height (mm) 240
Height (mm) 670
Width (mm) 470
Depth (mm) 535
Packed Height (mm) 820
Packed Width (mm) 525
Packed Depth (mm) 615
Footing Feet
Material Stainless Steel
Load Height 240mm
Kilowatts 2.75

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

Downloads
SKU Model
GP-40B Drain Pump
GP-40 Standard
Important Information
heroicons/outline/exclamation-circle

Do you require a water softener?

In hard water areas a water softener is strongly recommended to remove calcium, magnesium and minerals from water to prevent reduced performance and potential breakdown.

heroicons/outline/exclamation-circle

Please check loading height for this glasswasher.

Using tall glasses? Pilsner and specialist glassware have an increased height. Please check that they will fit and can be cleaned effectively.

heroicons/outline/exclamation-circle

This product requires a waste connection.

This product requires a waste connection. Please make sure these fittings are available and situated within 1m of the appliance.