Maidaid Halcyon Amika AMH51 Dishwasher

Why buy the Maidaid Halcyon Amika AMH51 Dishwasher?

The Maidaid Halcyon Amika AMH51 Dishwasher comes with one pegged plate rack, one open cup/ glass rack and a cutlery insert allowing for a range of equipment to be able to be washed. This unit is also supplied with an internal break tank which stops any chance of possible dirty water getting where it shouldn't.

This unit is suitable to clean with a hot or cold water supply, if hot the max is 50C degrees, which means that you don't need to worry about the water supply you give it as long as it has one. The accurate detergent and rinse aid dosing pumps have fascia controls to set up making it easier to know how much detergent you'll be putting in at any one time.

It has a three button bright LED display. This also has soft touch controls, so you don't need to press down hard for it to do what you want it to do. There is an alarms menu as well on the display. Adjustable feet that can range between 0 to 20mm.

There is also a drain pump version available to purchase. All models can be supplied with 3 phase operation.

*This unit is supplied with one pegged and one open rack and a round cutlery insert*  

Key features of the Maidaid Halcyon Amika AMH51 Dishwasher:

  • Three button bright LED display with soft touch controls and alarms menu on
  • Accurate detergent and rinse aid peristaltic dosing pumps with dosing setup by fascia controls
  • Composite easy clean parallel wash and rinse arm assembly
  • Supplied with internal break tank as standard
  • Drain pump version available
  • Supplied with one pegged plate rack, one open cup/glass rack and cutlery insert
  • Suitable for hot (max 50°C) or cold water supply, typically at 2 to 4 bar dynamic supply pressure
  • Optional Surface scrap tray 
  • Optional Electric 2.6 Kw 13A, 230V, UK plug
  • Optional Electric 4.5kW, 20A/ 30A, single phase hardwired, call to specify which
  • Optional Electric 6.5kw three phase hardwired
  • Water softener-auto – COLD water (5 to 50°C / 1400 litre capacity)/ HOT water (10 to 70°C / 2595 litre capacity)

Warranty Information:

This unit comes with a 12 Months Parts and Labour full warranty

 

SKU AMH51-DISH
Brand Maidaid Halcyon Warewashing
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 2
Rack Size 500x500
Litres capacity 20 Litres
Height (mm) 830
Width (mm) 580
Depth (mm) 610
Footing Feet
Material Stainless Steel
Interior Finish Stainless Steel

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

Maidaid Halcyon Amika AMH51 Dishwasher

SKU: AMH51-DISH

In stock

Delivery: Standard 3 to 5 Working Days
Height (mm): 830
Width (mm): 580
Depth (mm): 610
Warranty Cover: 12 Months Parts & Labour
More Specifications
loader
Loading...
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows businesses to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £10.45 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our catering equipment leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

PayPal Logo

Multiple payment options with

>

Why buy the Maidaid Halcyon Amika AMH51 Dishwasher?

The Maidaid Halcyon Amika AMH51 Dishwasher comes with one pegged plate rack, one open cup/ glass rack and a cutlery insert allowing for a range of equipment to be able to be washed. This unit is also supplied with an internal break tank which stops any chance of possible dirty water getting where it shouldn't.

This unit is suitable to clean with a hot or cold water supply, if hot the max is 50C degrees, which means that you don't need to worry about the water supply you give it as long as it has one. The accurate detergent and rinse aid dosing pumps have fascia controls to set up making it easier to know how much detergent you'll be putting in at any one time.

It has a three button bright LED display. This also has soft touch controls, so you don't need to press down hard for it to do what you want it to do. There is an alarms menu as well on the display. Adjustable feet that can range between 0 to 20mm.

There is also a drain pump version available to purchase. All models can be supplied with 3 phase operation.

*This unit is supplied with one pegged and one open rack and a round cutlery insert*  

Key features of the Maidaid Halcyon Amika AMH51 Dishwasher:

  • Three button bright LED display with soft touch controls and alarms menu on
  • Accurate detergent and rinse aid peristaltic dosing pumps with dosing setup by fascia controls
  • Composite easy clean parallel wash and rinse arm assembly
  • Supplied with internal break tank as standard
  • Drain pump version available
  • Supplied with one pegged plate rack, one open cup/glass rack and cutlery insert
  • Suitable for hot (max 50°C) or cold water supply, typically at 2 to 4 bar dynamic supply pressure
  • Optional Surface scrap tray 
  • Optional Electric 2.6 Kw 13A, 230V, UK plug
  • Optional Electric 4.5kW, 20A/ 30A, single phase hardwired, call to specify which
  • Optional Electric 6.5kw three phase hardwired
  • Water softener-auto – COLD water (5 to 50°C / 1400 litre capacity)/ HOT water (10 to 70°C / 2595 litre capacity)

Warranty Information:

This unit comes with a 12 Months Parts and Labour full warranty

 

SKU AMH51-DISH
Brand Maidaid Halcyon Warewashing
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 2
Rack Size 500x500
Litres capacity 20 Litres
Height (mm) 830
Width (mm) 580
Depth (mm) 610
Footing Feet
Material Stainless Steel
Interior Finish Stainless Steel

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

SKU Power Supply
AMH51 13 Amps Standard 3 Pin Plug
AMH51 20/ 30 Amps Single Phase Hardwired
AMH51 3 phase Three Phase Hardwired