Hobart Ecomax F504S Dishwasher

Why Buy the Hobart Ecomax F504S Dishwasher?

The WRAS approved Hobart Ecomax undercounter dishwasher has many innovative features for your kitchen. Featuring the same high performance as the F502 model, this fantastic dishwasher is easy to use, easy to maintain, and is a superb addition to any modern kitchen of any size. This unit includes wash cycles of both sixty and hundred and eighty seconds, which can wash up to sixty racks per hour – the equivalent of one thousand and eighty plates per hour in its 500×500mm basket. The compact design features a double skinned door, which serves to reduce noise and heat emissions, a 25 litres wash tank which consumes less water, less electric power, and contributes to lower running costs.

*Please Note: This unit is supplied with single phase 25A power lead as standard. It can easily be converted to single phase 13A or 3x16A 3 phase power onsite by a qualified engineer during installation. If you choose the 3 phase option on our website then Hobart will charge a fee to do this for you.

Additional features of this commercial dish washer include an integral water softener, Class A airgap, an integral booster pump, detergent, rinse aid dosing equipment, and electronic soft touch controls. This Hobart model includes a factory fitted drain pump, a thermostop rinse control ensuring rinsing at the correct temperature, and rotating upper and lower rinsing arms with indented anti-block jets which provide even coverage of all kitchen equipment.

Key Features of the Ecomax UnderCounter Dish Washer

  • Internal water softener to ensure only the best quality water is used during the cleaning and washing process and limescale build-up is reduced 
  • Wash cycles of 60 and 180 seconds, meaning efficient and fast plate turnover during busy times and even the most demanding of professional kitchen environments
  • 60 racks per hour capacity (1080 plates per hour), meaning that the dishwasher can provide sparkling clean plates at an incredible pace
  • Double-skinned door design reduces both heat loss and noise during operation, meaning that it will run hot and quietly in the kitchen, saving on both energy costs and time lost due to noise
  • Internal drain pump to prevent backflow and to ensure that all dirty dishwater is expelled before the beginning of a new wash cycle
  • Thermostop rinse control
  • Class A air gap to prevent backflow and to prevent dishwater from previous wash cycles being included in new wash cycles
  • Integral booster pump to ensure that rinsing and cleaning is of the highest possible quality, increasing the water pressure as appropriate
  • Soft-touch electronic controls to ensure ease of use and a reduction in staff training and operation times, meaning that the Hobart Ecomax F504S can operate at its full cycles per hour
  • Digital temperature display to provide up-to-date information on the status of the machine and its processes

Running Requirements and Product Specifications

This versatile dishwasher from Hobart has a basket size of 500 x 500 mm, and features one plate rack and one cutlery basket. This Hobart dishwasher unit includes a 355mm loading height, and can hold up to 18 pint glasses or plates per rack, washing up to 60 racks per hour. This model includes an integral water softener, and requires a water pressure from 0.6 to 6 BAR. The maximum water temperature that this unit uses is 60°C. Electrical requirements for this Ecomax dishwasher include a 25A power supply and the unit has a total load of 4.1 kW. This unit has a water tank capacity of 25 litres and a water consumption per cycle of 2.9 litres. With external dimensions of 830 (H) X 575 (W) X 600 (D) mm it will neatly fit under existing worktops to maximise kitchen space.

Standard Warranty

This unit comes with a standard manufacturer's one year parts and labour warranty.

SKU F504S
Weight 1.000000
Brand Hobart
Delivery Standard 3 to 5 Working Days

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

Hobart Ecomax F504S Dishwasher

SKU: F504S

x Discontinued

Delivery: Standard 3 to 5 Working Days
More Specifications
  • Includes water softener to prevent limescale build-up in hard water areas.
  • 60 - 180 second wash cycles can clean up to 60 500x500mm racks per hour.
  • Supplied with 1 plate rack and 1 cutlery basket.
  • Features detergent and rinse aid dosing equipment, rinse booster pump and integral drain pump.
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows businesses to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £13.94 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our catering equipment leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

Why Buy the Hobart Ecomax F504S Dishwasher?

The WRAS approved Hobart Ecomax undercounter dishwasher has many innovative features for your kitchen. Featuring the same high performance as the F502 model, this fantastic dishwasher is easy to use, easy to maintain, and is a superb addition to any modern kitchen of any size. This unit includes wash cycles of both sixty and hundred and eighty seconds, which can wash up to sixty racks per hour – the equivalent of one thousand and eighty plates per hour in its 500×500mm basket. The compact design features a double skinned door, which serves to reduce noise and heat emissions, a 25 litres wash tank which consumes less water, less electric power, and contributes to lower running costs.

*Please Note: This unit is supplied with single phase 25A power lead as standard. It can easily be converted to single phase 13A or 3x16A 3 phase power onsite by a qualified engineer during installation. If you choose the 3 phase option on our website then Hobart will charge a fee to do this for you.

Additional features of this commercial dish washer include an integral water softener, Class A airgap, an integral booster pump, detergent, rinse aid dosing equipment, and electronic soft touch controls. This Hobart model includes a factory fitted drain pump, a thermostop rinse control ensuring rinsing at the correct temperature, and rotating upper and lower rinsing arms with indented anti-block jets which provide even coverage of all kitchen equipment.

Key Features of the Ecomax UnderCounter Dish Washer

  • Internal water softener to ensure only the best quality water is used during the cleaning and washing process and limescale build-up is reduced 
  • Wash cycles of 60 and 180 seconds, meaning efficient and fast plate turnover during busy times and even the most demanding of professional kitchen environments
  • 60 racks per hour capacity (1080 plates per hour), meaning that the dishwasher can provide sparkling clean plates at an incredible pace
  • Double-skinned door design reduces both heat loss and noise during operation, meaning that it will run hot and quietly in the kitchen, saving on both energy costs and time lost due to noise
  • Internal drain pump to prevent backflow and to ensure that all dirty dishwater is expelled before the beginning of a new wash cycle
  • Thermostop rinse control
  • Class A air gap to prevent backflow and to prevent dishwater from previous wash cycles being included in new wash cycles
  • Integral booster pump to ensure that rinsing and cleaning is of the highest possible quality, increasing the water pressure as appropriate
  • Soft-touch electronic controls to ensure ease of use and a reduction in staff training and operation times, meaning that the Hobart Ecomax F504S can operate at its full cycles per hour
  • Digital temperature display to provide up-to-date information on the status of the machine and its processes

Running Requirements and Product Specifications

This versatile dishwasher from Hobart has a basket size of 500 x 500 mm, and features one plate rack and one cutlery basket. This Hobart dishwasher unit includes a 355mm loading height, and can hold up to 18 pint glasses or plates per rack, washing up to 60 racks per hour. This model includes an integral water softener, and requires a water pressure from 0.6 to 6 BAR. The maximum water temperature that this unit uses is 60°C. Electrical requirements for this Ecomax dishwasher include a 25A power supply and the unit has a total load of 4.1 kW. This unit has a water tank capacity of 25 litres and a water consumption per cycle of 2.9 litres. With external dimensions of 830 (H) X 575 (W) X 600 (D) mm it will neatly fit under existing worktops to maximise kitchen space.

Standard Warranty

This unit comes with a standard manufacturer's one year parts and labour warranty.

SKU F504S
Weight 1.000000
Brand Hobart
Delivery Standard 3 to 5 Working Days

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.