Find Out More About Our Easter Holiday Delivery & Opening Times Here

DC SGP35 Standard Range Front Loading Glasswasher

Why Buy the DC SGP35 Front Loading Glasswasher?

The SGP35 front loading glass washer from DC is an energy-saving double skinned stainless steel cabinet unit designed to save energy and provide users with the most convenience for the lowest price. This standard range glasswasher is supplied with 2 x 350mm baskets, and has increased washing height to accommodate specialist glasses such as Peroni, Bulmers, Cobra and Amstel. 

The DC SGP35 Standard Range undercounter glasswashers will keep washing time after time at a price you can afford. Fitted with cost and energy saving features such as new energy saving wash pump this is a glasswasher ideal for those wishing to combine efficiency with superb product quality.

This unit features two minute cycle, energy-saving wash pump and auto-dosing units. The DC SGP35 front loading warewasher is single skinned in construction and has an engineer diagnostic mode. The programmable options of the SGP35 include: rinse thermolock, auto-start door and audio status indicator.

This unit’s simple and intuitive controls mean that staff training times are reduced, and the unit is fundamentally easy to understand and use.

Key Features of the SGP35 Front Loading Glass Washer:

  • Specially designed to fit Peroni, Bulmers, Cobra and Amstel glasses
  • Supplied with 2 glass baskets
  • Washes up to 420 glasses per hour
  • Removable anti-block wash and rinse arms
  • 2 minute cycle time
  • Low water usage
  • EasyClean filters
  • Integral detergent and rinse aid dosing units
  • Simple, intuitive controls
SKU SGP35_GLASS
Brand DC Warewashing
Delivery Standard 1 to 3 Working Days
Baskets Supplied 2
Usable Height (mm) 250
Height (mm) 640
Width (mm) 425
Depth (mm) 470
Footing Feet
Material Stainless Steel
Load Height 640mm
Power Supply Standard 3 Pin Plug
Kilowatts 3

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

DC SGP35 Standard Range Front Loading Glasswasher

SKU: SGP35_GLASS

In stock

Delivery: Standard 1 to 3 Working Days
Height (mm): 640
Width (mm): 425
Depth (mm): 470
Power Supply: Standard 3 Pin Plug
More Specifications
  • Specially designed to fit Peroni, Bulmers, Cobra and Amstel glasses
  • Supplied with 2 glass baskets
  • Washes up to 380 glasses per hour
  • Removable anti-block wash and rinse arms
loader
Loading...
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows Limited companies to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £5.18 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our catering equipment leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

PayPal Logo

Multiple payment options with

>

Why Buy the DC SGP35 Front Loading Glasswasher?

The SGP35 front loading glass washer from DC is an energy-saving double skinned stainless steel cabinet unit designed to save energy and provide users with the most convenience for the lowest price. This standard range glasswasher is supplied with 2 x 350mm baskets, and has increased washing height to accommodate specialist glasses such as Peroni, Bulmers, Cobra and Amstel. 

The DC SGP35 Standard Range undercounter glasswashers will keep washing time after time at a price you can afford. Fitted with cost and energy saving features such as new energy saving wash pump this is a glasswasher ideal for those wishing to combine efficiency with superb product quality.

This unit features two minute cycle, energy-saving wash pump and auto-dosing units. The DC SGP35 front loading warewasher is single skinned in construction and has an engineer diagnostic mode. The programmable options of the SGP35 include: rinse thermolock, auto-start door and audio status indicator.

This unit’s simple and intuitive controls mean that staff training times are reduced, and the unit is fundamentally easy to understand and use.

Key Features of the SGP35 Front Loading Glass Washer:

  • Specially designed to fit Peroni, Bulmers, Cobra and Amstel glasses
  • Supplied with 2 glass baskets
  • Washes up to 420 glasses per hour
  • Removable anti-block wash and rinse arms
  • 2 minute cycle time
  • Low water usage
  • EasyClean filters
  • Integral detergent and rinse aid dosing units
  • Simple, intuitive controls
SKU SGP35_GLASS
Brand DC Warewashing
Delivery Standard 1 to 3 Working Days
Baskets Supplied 2
Usable Height (mm) 250
Height (mm) 640
Width (mm) 425
Depth (mm) 470
Footing Feet
Material Stainless Steel
Load Height 640mm
Power Supply Standard 3 Pin Plug
Kilowatts 3

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

SKU Model
SGP35 D Drain Pump
SGP35 IS D Drain Pump and Integral Water Softener
SGP35 IS Integral Water Softener
SGP35 Standard
Important Information
heroicons/outline/exclamation-circle

This product requires a waste connection.

This product requires a waste connection. Please make sure these fittings are available and situated within 1m of the appliance.