Classeq P500AWSD Everyday Use Hood Type Dishwasher

SKU
P500AWSD

Products may differ, images are for illustration purposes only.

Price
0 Extras added
Regular Price £8,081.00 Special Price £3,229.17 Ex VAT
£3,875.00 Inc VAT

Lease from £14.13 pw

Minimum order value £1000 ex VAT

IMPORTANT INFORMATION

Choosing gravity drain or drain pump.

Choose a gravity drain system when a unit’s water outlet is higher than the waste drainage. Choose a drain pump when the water outlet is lower than the waste drainage.

Please check loading height for this glasswasher.

Using tall glasses? Pilsner and specialist glassware have an increased height. Please check that they will fit and can be cleaned effectively.

important_large_delivery

General Delivery Information.

Please be aware of any delivery restrictions, low bridges, narrow roads, parking restrictions or anything else that can stop delivery. Please click on the the Delivery and Returns tab for more important information.

Do you require a water softener?

In hard water areas a water softener is strongly recommended to remove calcium, magnesium and minerals from water to prevent reduced performance and potential breakdown.

Why Buy the Classeq P500AWSD Everyday Use Hood Dishwasher?

This P500AWSD pass-through dishwasher from Classeq is very easy to clean and maintain; ideal for everyday use. This model comes complete with an integral water softener, 3 baskets (one open basket, one sectioned basket and one cutlery basket), and a low capacity wash tank. This model also includes a WRAS approved type A air gap, and either a 90 second, three-minute or five minute wash cycle.

This excellent commercial dish washer also features an extraordinary 720 plates per hour capacity, and can operate in both a corner and pass-through capacity. One of the most innovative features is its continuous hood clean, which means that it assists in its own maintenance. The P500AWSD also includes both an integral rinse aid dispenser and an integral detergent dispenser, complete with drain pump.

To ensure that only the best water is used during the cleaning process, this unit from Classeq features full-width wash tank filters to remove debris and other particulates from the mains water before use, along with a break tank to ensure hygienic and safe water disposal.

Key Features of the P500AWSD Pass Through Dishwasher with Detergent Pump & Water Softener

  • Chemical dosing pump which ensures that the correct amount of chemical dosage is applied to the washing load, without the risk of under or overdosing
  • Integral drain pump which drains wastewater away safely and helps to ensure that no dirty dishwater is left at the end of a cycle
  • Integrated water softener prevents hard water debris and lime scale building-up
  • Liquid crystal display (LCD)
  • Powerful wash pump to ensure a brilliant wash quality and at the optimum water pressure
  • Stainless steel finish provides this unit with a robust and durable construction, able to withstand even the toughest of professional kitchen environments
  • 18 plates per basket capacity, providing users with the ability to turn over washing loads at a fast and efficient pace
  • WRAS approved type ‘A’ air gap prevents backflow and ensures that all used water is drained before a new washing cycle begins
  • Low capacity wash tank to save on both energy and water costs, while also providing energy efficiency
  • Rinse booster pump ensures that the load is thoroughly rinsed before the next cleaning process

Running Requirements and Product Specification

The P500AWSD features cycle times of either 1 ½, 3 or 5 minutes, a rinse booster pump, and a built-in air gap. The required water pressure is 2 BAR, and the required water flow is 8 L per minute. The wash tank capacity is 39 L, and the operating temperature of the wash tank is 55°C. The rinse boiler has a capacity of 7.5 L, with an operating temperature of 80°C. The amps required for a three-phase water fed load at 10°C is 13 A, with single phase at 30 A, and a total power load of 6.68 kW. This dishwasher includes a rack size of 500×500 mm, and a maximum clear entry height for loading of 440 mm. This unit has external dimensions measuring 630 (W) X 1520 (hood closed) /1940 (hood open) (H) X 720 (D). The drain height is 700mm above floor level.

Standard Manufacturer's Warranty

This unit comes with a standard one-year parts and labour warranty.

 

Units:
Dims
Weight
Capacity
More Information
SKU P500AWSD
Delivery Standard 7 to 10 Working Days
Warranty Type Parts and Labour Warranty
Exterior Finish Stainless steel
Height (mm) 1520 - 1940
Width (mm) 630
Depth (mm) 720
Baskets 3; 1 open, 1 sectioned and 1 cutlery
Output 12, 20 or 40 baskets p/hr
Power Supply Electric
Warranty 12 months parts and labour
CE Marked No
Type 500mm Basket
Feature With Drain Pump
Power Rating 6.68 kW
Warranty 12 Months Parts and Labour Warranty
 

There are no documents for this product. If you require more information please contact the sales team.

For full details please read our Delivery, Returns & Cancellations page

KEY DELIVERY INFORMATION
The majority of deliveries are free to mainland UK

Please use the Delivery Cost Calculator to check if you are
eligible. A surcharge may be applicable to some postcodes in the UK.

Standard deliveries are made on an 18 tonne vehicle.

Please make sure a vehicle of this size (think a double decker bus
or bin lorry) can get to the delivery location. Delivery on a
smaller vehicle can be arranged with prior notice however will
incur an additional cost.

Deliveries are typically made between 8am & 6pm however a small number of manufacturers may deliver between 7am & 7pm.

We are unable to give an estimate of delivery time as all
deliveries are at the courier’s discretion. Timed delivery options
are available on selected products/manufacturers however this
will incur a surcharge.

RETURNS AND CANCELLATIONS

Any return made on the grounds of mis-order by the customer or incorrect measurements etc. will incur charges.
Any cancellation made once an order has been: processed, dispatched for delivery or left the manufacturer’s site, will be subject to a restocking fee, even if you have not yet received delivery.
Delivery Cost Calculator
Order within 
for EST delivery of
Parts and labour warranty (full warranty)

A ‘Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

The majority of manufacturers will offer a recycling and disposal service. Where manufacturer services aren't available we recommend contacting your local authority or a reputable company listed in your area.

Ordered a new piece of equipment and arranged for recycling and disposal through the same manufacturer? It is important to bear in mind that not all recycling services will be carried out on the same day as delivery. Equipment remains your responsibility, that includes with regards to environmental aspects, so make sure you have suitable storage for old units until they can can be collected.

All units scheduled on a recycle service must be ready to collect outside of the premises on the day of collection.

Read more about our recycling services here.

At FFD Catering Equipment we offer a range of financial solutions including a Lease Purchase option thats allows you to buy the right, quality commercial catering equipment for your business without tying up your cashflow. Payable in small & manageable monthly installments over periods between 1 to 5 years. Lease purchase has helped 1000's of our customers drive their business forward.

Leasing is available on all purchases over £1000 + VAT. To learn more about leasing criteria and who can apply read our The Truth About...Commercial Leasing article in FFD Info Centre.

Use our simple leasing calculator to quickly calculate your estimated repayments. 

Advantages of leasing from FFD Catering Equipment

  • Tax Benefits - You can offset 100% of leased commercial catering equipment rental costs against tax liability of your business to maximise tax efficiency.

  • Instant, Maximum Benefit - When leasing you will get the best equipment for the job straight away, rather than waiting to accrue budget to allow purchase.

  • Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

  • High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

  • Fast Approval – We can often give you an answer within a hours.

  • Remove the Worry - Spread the cost  of your commercial catering equipment over the working life of the appliance/s.

Please Note;

The lease figures displayed are an estimate and subject to status. Terms and Conditions will vary depending on the lender sourced. All documentation will be provided prior to approval.

For further details please see our Leasing commercial catering equipment page.

Equipment Type : Catering & Refrigeration
Monthly Payment:
Product Questions

There are no documents for this product. If you require more information please contact the sales team.