Winterhalter PT-M EnergyPlus Passthrough Dishwasher

Why Buy the Winterhalter PT-M EnergyPlus Hood Dishwasher?

"PT-M EnergyPlus pass through dishwasher; maximum efficiency, optimal kitchen climate." - Winterhalter

The Winterhalter PT-M EnergyPlus Pass Through Dishwasher is designed to perform in even the toughest commercial kitchens. Boasting superior cleaning, pristine finishes and improved efficiency, not only are results sure to impress, but also the reduced operational costs are always welcome. Designed with an exhaust air heat exchanger to convert the warm water vapour into energy and a waste water heat exchanger to heat the cold water inlet, you can permanently reduce operating costs, minimise power consumption and improve the working environment by maintaining a comfortable ambient temperature even during use.

This market leading hood warewasher can be tailored to meet every demand, with a choice of dish, glass, cutlery or bistro software options available. Each programme uses a Variopower cleaning system which adapts to the type of items being washed and the level of soiling, automatically adjusting temperature, detergent, rinse aid and cycle duration accordingly ensuring the best possible clean every time.

Also offering a guided self cleaning programme and machine descaling function, your equipment will remain as hygienically clean as your dishes.

MODELS;

  • Standard EnergyPlus - Uses energy from the waste water and exhaust air to heat the cold water supply reducing operational costs and increasing overall efficiency.

EXPERT CLEANING  

  • Uses VarioPower which adjusts washing pressure, adapting to the type of item being washed and the level of soiling.
  • All washing elements including temperature, detergent, rinse aid and time/duration are automatically adjusted in line with the items being washed.
  • Full flow filtration with tank cover, filter cylinder, pump inlet filter and Mediamat which removes any fine impurities from the water.
  • Clouding sensor monitors the quality of the water, introducing fresh water or regenerating as necessary when sediment levels are too high.
  • Elliptical wash fields feature special jet geometry for powerful in depth cleaning.
  • Tank temperature: 45°C - 69°C (temperatures differ according to software).
  • Rinse temperature: 50°C - 86°C (temperatures differ according to software).

KEY FEATURES OF THE PT SERIES WAREWASHER

  • Features a large waste water heat exchanger and an additional exhaust air heat exchanger
  • Active energy management allows continuous use thanks to rapid heat up and short cycle times.
  • EnergyLight heat recovery technology uses the energy contained within the waste water to heat the cold water feed reducing operating costs.
  • Special ECO programme for environmentally aware businesses.  
  • Offers short and intensive programmes for when time is of the essence.
  • Silent programme option.
  • Basic cleaning programme for dishes.
  • PIN protected chef level allows access to the integrated hygiene and operating logbooks.

MAIN BENEFITS 

  • Supplied with a standard rack package including 8 row plate rack, cutlery mesh rack and a 7 compartment cutlery holder. 
  • Includes main power cable, inlet, drain pipe and standard rack package. 
  • High quality stainless steel construction with rear panel and IP X5 splash guard.
  • Hygienic tank heater and rack guide.
  • Double skinned hood with lock position.
  • Automatic hood start.
  • Simple touchscreen control with colour coded single button control showing progress display.
  • Touchscreen uses symbols for self-explanatory ease of operation.
  • Guided self cleaning prevents deposits and odours. 
  • Machine descaling function keeps your equipment hygienically clean.
  • Automatic start up / shut down can be time controlled.
  • Soft start for washing pump.
  • Thermostop on boiler and tank only allowing rinse to begin once set temperature has been reached.
  • Includes drain pump.
  • Integral rinse booster pump.
  • Leak sensor.

To complete your warewashing area, a choice of tabling and sink configurations are available to suit all kitchen spaces and layouts. For more information contact our sales team.  

You may also be interested in the PT-L model offering the same capacity and outstanding features but with smaller height and depth dimensions but increased width.

 

SKU PT-MENERGYPLUS
Weight 156.000000
Brand Winterhalter
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 2
Height (mm) 2175
Width (mm) 635
Depth (mm) 750
Footing Legs with Feet
Material Stainless Steel
Power Supply Three Phase Hardwired

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

Winterhalter PT-M EnergyPlus Passthrough Dishwasher

SKU: PT-MENERGYPLUS

In stock

Delivery: Standard 3 to 5 Working Days
Height (mm): 2175
Width (mm): 635
Depth (mm): 750
Power Supply: Three Phase Hardwired
Warranty Cover: 12 Months Parts & Labour
More Specifications
  • Choice of software to suit all requirements - dishes, glasses, cutlery and bistro (when cleaning a mixture of glasses, dishes and cutlery).
  • Up to 3 basic cleaning programmes depending on the software chosen.
  • Theoretical rack per hour capacity differs with each software option. Dishes - 44/32/22 with 3 programmes. Bistro - 40/32/28 with 3 programmes. Glasses - 22/32/48 with 3 programmes. Cutlery - 11 with 1 programme.
  • 35 litre tank capacity.
  • Power: 9.1 kW, 16 A, 400V, 3 phase (hardwired); 13.2 kW, 25 A, 400 V, 3 phase (hardwired); 14.7 kW, 32 A, 400 V, 3 phase (hardwired).
loader
Loading...
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows Limited companies to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £73.56 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our catering equipment leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

PayPal Logo

Multiple payment options with

>

Why Buy the Winterhalter PT-M EnergyPlus Hood Dishwasher?

"PT-M EnergyPlus pass through dishwasher; maximum efficiency, optimal kitchen climate." - Winterhalter

The Winterhalter PT-M EnergyPlus Pass Through Dishwasher is designed to perform in even the toughest commercial kitchens. Boasting superior cleaning, pristine finishes and improved efficiency, not only are results sure to impress, but also the reduced operational costs are always welcome. Designed with an exhaust air heat exchanger to convert the warm water vapour into energy and a waste water heat exchanger to heat the cold water inlet, you can permanently reduce operating costs, minimise power consumption and improve the working environment by maintaining a comfortable ambient temperature even during use.

This market leading hood warewasher can be tailored to meet every demand, with a choice of dish, glass, cutlery or bistro software options available. Each programme uses a Variopower cleaning system which adapts to the type of items being washed and the level of soiling, automatically adjusting temperature, detergent, rinse aid and cycle duration accordingly ensuring the best possible clean every time.

Also offering a guided self cleaning programme and machine descaling function, your equipment will remain as hygienically clean as your dishes.

MODELS;

  • Standard EnergyPlus - Uses energy from the waste water and exhaust air to heat the cold water supply reducing operational costs and increasing overall efficiency.

EXPERT CLEANING  

  • Uses VarioPower which adjusts washing pressure, adapting to the type of item being washed and the level of soiling.
  • All washing elements including temperature, detergent, rinse aid and time/duration are automatically adjusted in line with the items being washed.
  • Full flow filtration with tank cover, filter cylinder, pump inlet filter and Mediamat which removes any fine impurities from the water.
  • Clouding sensor monitors the quality of the water, introducing fresh water or regenerating as necessary when sediment levels are too high.
  • Elliptical wash fields feature special jet geometry for powerful in depth cleaning.
  • Tank temperature: 45°C - 69°C (temperatures differ according to software).
  • Rinse temperature: 50°C - 86°C (temperatures differ according to software).

KEY FEATURES OF THE PT SERIES WAREWASHER

  • Features a large waste water heat exchanger and an additional exhaust air heat exchanger
  • Active energy management allows continuous use thanks to rapid heat up and short cycle times.
  • EnergyLight heat recovery technology uses the energy contained within the waste water to heat the cold water feed reducing operating costs.
  • Special ECO programme for environmentally aware businesses.  
  • Offers short and intensive programmes for when time is of the essence.
  • Silent programme option.
  • Basic cleaning programme for dishes.
  • PIN protected chef level allows access to the integrated hygiene and operating logbooks.

MAIN BENEFITS 

  • Supplied with a standard rack package including 8 row plate rack, cutlery mesh rack and a 7 compartment cutlery holder. 
  • Includes main power cable, inlet, drain pipe and standard rack package. 
  • High quality stainless steel construction with rear panel and IP X5 splash guard.
  • Hygienic tank heater and rack guide.
  • Double skinned hood with lock position.
  • Automatic hood start.
  • Simple touchscreen control with colour coded single button control showing progress display.
  • Touchscreen uses symbols for self-explanatory ease of operation.
  • Guided self cleaning prevents deposits and odours. 
  • Machine descaling function keeps your equipment hygienically clean.
  • Automatic start up / shut down can be time controlled.
  • Soft start for washing pump.
  • Thermostop on boiler and tank only allowing rinse to begin once set temperature has been reached.
  • Includes drain pump.
  • Integral rinse booster pump.
  • Leak sensor.

To complete your warewashing area, a choice of tabling and sink configurations are available to suit all kitchen spaces and layouts. For more information contact our sales team.  

You may also be interested in the PT-L model offering the same capacity and outstanding features but with smaller height and depth dimensions but increased width.

 

SKU PT-MENERGYPLUS
Weight 156.000000
Brand Winterhalter
Warranty Cover 12 Months Parts & Labour
Delivery Standard 3 to 5 Working Days
Baskets Supplied 2
Height (mm) 2175
Width (mm) 635
Depth (mm) 750
Footing Legs with Feet
Material Stainless Steel
Power Supply Three Phase Hardwired

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

SKU Software
PT-MENERGYPLUS-S-Bistro Bistro
PT-MENERGYPLUS-S-Cutlery Cutlery
PT-MENERGYPLUS-S-Dish Dish
Important Information
heroicons/outline/exclamation-circle

Do you require a water softener?

In hard water areas a water softener is strongly recommended to remove calcium, magnesium and minerals from water to prevent reduced performance and potential breakdown.

heroicons/outline/exclamation-circle

Please check loading height for this glasswasher.

Using tall glasses? Pilsner and specialist glassware have an increased height. Please check that they will fit and can be cleaned effectively.