Sammic X-41 Glasswasher

Models:

• With or without a drain pump.

Why buy the Sammic X-41 Glasswasher?

The Sammic X-41 features 3 independent wash cycles each specifically for different types of glasses or degrees of cleaning: 120", 180" or 130". Loading the unit it can hold glasses up to 280mm to accommodate for a wide variety of glasses. 

Includes as standard a rinse aid pump and detergent dosing equipment to precisely release the chemicals in each wash cycle. 

Important points of the Sammic X-41

• Holds 400mm baskets.
• Dimensions: 710 x 470 x 535mm (H x W xD).
• 2.74kW, 230 volts, standard 13 Amp 3 pin plug.
  
• A single skin door traps heat and noise.
• Sits upon adjustable rubber feet to raise the unit up to the required height.

Cleaning and using the glasswasher

Each wash cycle consumes 2.2 litres of water. A double filter ensures the unit stays dirt free and removes unwanted waste from each cycle. Eliminating dead zones the wash tank includes stainless steel rack holders which also provide an even distribution of water. Furthermore, precisely angled spray arms offer an optimum washing experience. These are easy to assemble and remove in need of potential maintenance.

Each wash cycle noise level measured from 1 meter to the machine is <70dB (A) which is roughly the same noise level as a normal conversation. However the unit does leak little amounts of noise and heat from each wash cycle, try the Sammic S-41 which featurs a double skin door to trap the heat and noise.

Sammic X-41 warranty

24 months manufacturer's parts and labour warranty included.

Installation requires water, electric and waste supply within 1m of the machine's position.

Please Note: These units require installation by a qualified warewasher engineer otherwise warranty may be void.